Patient Aids

SpO2 Based Oxygen Control System- Oxy Care

To avoid the wastage of oxygen from the cylinder-based oxygen support system, an Spo2 based regulated oxygen cylinder has been designed. This system is designed to monitor the SpO2 levels of the user through a fingertip sensor and the output of same is connected to the electronic controller for regulating oxygen delivery. Depending on the patient’s oxygen saturation, the electronic controller auto regulates the flow of oxygen through a nasal cannula. The system consists of 10 litre O2 Cylinder; pressure Regulator cum Flow Controller, Humidifier, Nasal Cannula, Non Rebreather mask, Electronic Control System, and SpO2 Probe.

For covid management, this system shall be applicable to mild to moderate patients who need less and more/critical attention by clinicians. The developed system is offered in configurations.

Configuration 1 - consists of 10 litre O2 Cylinder; Pressure Regulator cum Flow Controller, Humidifier, Nasal Cannula, Non-Rebreather Mask shall be applied to patients who require less attention from health care.

Configuration 2 - consists of components of Option 1 and Electronic auto regulation of O2 system (low pressure regulator, Electronic Control System, SpO2 Probe) shall be applied to patients who require more and continuous attention. The more critical and continuous attention required covid patients who needs to be continuously monitored for SpO2 and accordingly required O2 to be given requires this comprehensive solution.

PM Cares has approved the funds for the procurement of 1,00,000 numbers of configuration 1, 50,000 numbers of configuration 2 and additional 10,00,000 Non-Rebreather Masks.