Aerodynamics Panel
| S.NO. | TITLE | PI/Co-PI | INSTITUTE |
|---|---|---|---|
| 1. | Measurement of Forces and Moments on Generic Models in a Hypersonic Shock Tunnel | Dr S Saravanan | IISc, Bangalore |
| 2. | Noise Supression in Supersonic Nozzles | Dr Rajarshi Das | School of Mechanical Engineering, SASTRA Deemed to University, Tirumalaisamudram, Thanjavur |
| 3. | Establishment of Hypervelocity Expansion Tunnel Test Facility and Heat Flux Measurements Over Payload Configurations | Prof Mohammed Ibrahim S | IIT, Kanpur |
| 4. | Fluidic Thrust Vectoring of a Supersonic Jet | Dr Arun Kumar P | IIT, Kanpur |
| 5. | CFD Analysis of Ejection Seat System of an Aircraft | Dr Sunil Chandel | DIAT, Pune |
| 6. | Supersonic Jet Control by Tabs with Slanted Perforation | Prof Suresh Chandra Khanda | Rajalakshmi Engineering College, Chennai |
| 7. | Experimental Investigation of Base Pressure Field on Ducted Ramjet Intake Configuration | Dr M Viji | CSIR-NAL, Bangalore |
| 8. | CFD Simulation of Ring Laser Gyroscope | Dr Natteri M Sudharasan | Rajalakshmi Engineering College, Chennai |
| 9. | Influence of Mach Number on the Acoustic and Mixing Characteristics of a Strut-Cavity with Different Length to Depth Ratios | Dr NS Vikramaditya | CSIR-NAL, Bangalore |
| 10. | Investigation and Development of Physics Informed Neural Networks for Analysis of Complex Fluid Dynamics Phenomena | Prof Arya Kumar Bhattacharya | Ecole Centrale School of Engineering, Mahindra University, Hyderabad |
| 11. | Estimation of Aerodynamic Heat Flux Over Martian Atmospheric Entry Configurations- A Numerical and Experimental Investigation | Prof Ashok De | IIT, Kanpur |
| 12. | Experimental and Numerical Study on the Interaction of a Shock Tube Generated Blast Wave with Structures for Blast Attenuation and Mitigation | Dr Abhishek Kundu & Prof Satya Prakash | MNNIT, Allahabad & CMERI, Durgapur |
| 13. | Prediction of Aerodynamic Characteristics of Grid Fins at Subsonic, Transonic and Supersonic Flows | Prof P Theerthamalai | ACS College of Engineering, Bengaluru |
| 14. | Experimental Studies on Flow Separation and its Control in a Submerged Intake | Dr C Manisankar | CSIR-NAL, Bangalore |
Aerospace Resource Panel
| S.NO. | TITLE | PI/Co-PI | INSTITUTE |
|---|---|---|---|
| 1. | DRDO Scholarship Scheme for Under Graduate and Post Graduate Level Girls Students Related to Aerospace and Aeronautical Engineering, Space Engg., & Rocketry/Avionics/Aircraft Engg.: 2019 (Batch-1) | Registrar( IIT Bombay, IIT Chennai, IIT Kanpur, IIT Kharagpur, DIAT Pune, PEC Chandigarh, IIES&T Kolkata, AVV Coimbatore) | IIT Kanpur, IIT Bombay, IIT Madras, IIT Kharagpur, PEC Chandigarh, DIAT Pune, SASTRA Univ T.N., IIES Kolkata, BESU Kolkata, AVV, Coimbatore T.N. |
| 2. | DRDO Scholarship Scheme for Under Graduate and Post Graduate Level Girls Students Related to Aerospace and Aeronautical Engineering, Space Engg., & Rocketry/Avionics/Aircraft Engg.: 2020 (Batch-2) | Registrar(IIT Bombay, IIT Madras, IIT Kanpur, IIT Guwahati, IIT Kharagpur, Birla Institute of Technology, Jharkhand, DIAT Pune, PEC Chandigarh, IIES&T Kolkata) | IIT Kanpur, IIT Bombay, IIT Madras, IIT Kharagpur, PEC Chandigarh, DIAT Pune, SASTRA Univ T.N., IIES Kolkata, BESU Kolkata, AVV, Coimbatore T.N. |
| 3. | DRDO Scholarship Scheme for Under Graduate and Post Graduate Level Girls Students Related to Aerospace and Aeronautical Engineering, Space Engg., & Rocketry/Avionics/Aircraft Engg.: 2021 (Batch-III) | Registrar(IIT Bombay, IIT Madras, IIT Kanpur, IIT Hyderabad, Indian Institute of Space Science & Tech., Thiruvananthapuram, Rashtreya Vidyalaya College of Engg., DIAT Pune, PEC Chandigarh, MNNIT, Allahabad, Amrita Vishwa Vidyapeetham, Tamilnadu, Nitte Meenakshi Institute of Technology, Karnataka, Visvesvaraya Technological University, Karnataka) | Registrar (IIT Bombay, IIT Madras, IIT Kanpur, IIT Hyderabad, Indian Institute of Space Science & Tech., Thiruvananthapuram, Rashtreya Vidyalaya College of Engg., DIAT Pune, PEC Chandigarh, MNNIT, Allahabad, Amrita Vishwa Vidyapeetham, Tamilnadu, Nitte Meenakshi Institute of Technology, Visvesvaraya Technological University, Karnataka) |
Materials & Manufacturing Panel
| S.NO. | TITLE | PI/Co-PI | INSTITUTE |
|---|---|---|---|
| 1. | Experimental Investigations and Electro-Thermal Modeling of Electrode Wear Compensation in Micro Electric Discharge Machining (uEDM) of Shaped Holes on Super Alloys for Improving the Dimensional Accuracy and Functional Performance of Cooling Holes on Turbine Blades and Vanes | Dr Basil Kuriachen | NIT, Calicut |
| 2. | Experimental Investigations on Nitriding of M50 Nil Steel for Aerospace Bearings Applications | Prof B Venkatesh | Vardhaman College of Engineering, Kacharam, Shamshabad, Rangareddy Dist. |
| 3. | Mechanical and Tribological Characterization of Al-Si Product Developed by Wire Are Additive Manufacturing | Dr Shivraman | NIT, Warangal |
| 4. | Process Sequence and Metallurgical Assessment of Electron Beam Weld Joints of Martensitic Stainless Steel for Gear Applications | Dr M Vijayalakshmi | Mahatma Gandhi Institute of Technology (MGIT), Hyderabad |
| 5. | Partial Slip Fretting Studies on AL 7075-T6 Alloy at Sub-Zero Temperature | Dr Vadivuchezhian Kaliveeran | NIT, Mangalore |
| 6. | Studies on Creep Behavior of Welded Gas Turbine Grade Su-718 Super Alloy | Dr K Venkateswarlu | CSIR-NAL, Bangalore |
| 7. | Development of Pd Diffused Transition Metal (Mo,Co,W) Based Chalcogenic Heterostructures Support on Carbon Nanostructures/Ni Form for Electrochemical Water Splitting | Dr KK Aruna | Rathinam Technical Campus, Pollachi Road, Eachanari, Coimbatore |
| 8. | Development of ZrB2-B4C Functionally Graded Materials for High-Temperature Aerospace Application | Dr Siddhartha Roy | IIT, Kharagpur |
| 9. | Development of Novel B and C Modified Fillers for the Gas Tungsten Arc Welding of Ti Alloys | Dr T Mahesh Kumar | NIT, Warangal |
| 10. | Understanding the Role of Hydrogen in Titanium Alloy Weldments | Dr N Kishore Babu | NIT, Warangal |
| 11. | Strain Partitioning and Damage Mechanism during Thermo-Mechanical Fatigue in a Ni-base CM247LC Superalloy | Prof Sumantra Mandal | IIT, Kharagpur |
| 12. | Development of Screw Extruder Based Additive Manufacturing System for Developing Ceramic Core to be used in Turbine Blade Casting | Dr Sudip Kumar Samanta | CSIR-Central Mechanical Engineering Research Institute, Durgapur |
| 13. | Numerical and Experimental Investigations of Additively Manufactured Aircraft Wing Components Using Carbon Fiber Reinforced Polymer Composite Material | Dr DG Thakur | DIAT, Pune |
| 14. | Development of Shape Memory Oxide Thin-Films for Aerospace Applications: Understanding the Phase-Switching Behavior, Related Defect Formation and Shape Recovery Process | Prof Kaustuv Manna | IIT, Delhi |
| 15. | Development of Doped Barium Zirconate Titanate (BZT) Based Piezoelectric Ceramics for Acoustic Emission Sensor Applications | Dr Anoop Kumar Shukla | Amity Institute of Applied Sciences, Amity University, U.P. |
| 16. | Development of Self-Biased Magnetic Materials for Low-Loss Bias-Field-Free Passive Microwave Devices | Prof Arabinda Haldar | IIT, Hyderabad |
| 17. | Development of Perovskite Oxides SrCeO3 and Sr2CeO4 as High-Temperature Thermal Barrier Coating (TBC) Material for Aerospace Application | Prof (Mrs) Shail Upadhyay | IIT Banaras Hindu University (BHU), Varanasi |
| 18. | Development of a Stable Machinability Investigation and Thermal Modelling of Aerospace Material | Prof Chinmaya Prasad Mohanty | VIT University, Vellore |
| 19. | Development of Multiferroic Tapes for Sensing and Energy Harvesting Applications | Dr N Venkata Prasad | University College of Science, Osmania University, Hyderabad |
| 20. | Process and Hybrid Tool Design for Higher Productivity in FSW Butt-Joints of Thick A1-Alloy 2219 Plates | Prof Jeevan Jaidi | BITS, Pilani, Hyderabad |
| 21. | Extensive Evaluation of Mechanical Properties such as Tensile, HCF and LCF (at Room Temperature & at High Temperature) of Important Superalloys (CMSX-4 or CM-247) and Microstructure-Mechanical Properties Correlation | Prof Sushil Mishra | IIT, Bombay |
| 22. | Design and Development of a Reconfigurable Electrochemical Machining Centre for Rocket Shells | Prof Janakarajan Ramkumar | IIT, Kanpur |
| 23. | Heteroatoms and Positive Charge Bearing Carbon Skin Comprising Graphene for Energy Storage | Dr K Krishnamoorthy | CSIR-National Chemical Laboratory (NCL), Pune |
| 24. | Development of Long Lasting Polyurethane Nanocomposite Films and Life Time Estimation using Finite Element Analysis with respect to Aerostat Application | Prof Santanu Chattopadhyay | IIT, Kharagpur |
| 25. | Mechanical and Microstructural Behavior of Laser Based Directed Energy Deposited and Wire Arc Additive Manufactured Ti-6A1-4V Components | Dr Ajay Kumar | IIT, Tirupati and Sardar Vallabhabhai National Institute of Technology (SVNIT), Surat |
| 26. | Creep and Fatigue of Selective Laser Melted Ti-6242 Alloy | Prof Srikant Gollapudi | IIT, Bhubaneswar |
| 27. | Development of Ultra-Fine-Grained Thin Sheets of Beta Ti Alloys Through Constrained Groove Pressing and Cryo-Rolling Processes | Dr Suresh Neelakantan | IIT, Delhi |
| 28. | Feasibility Study on the Single Crystal Growth of the CMSX-4 Alloy Through the Direct Energy Deposition Process | Prof Abhik Narayan Choudhury | IISc, Bangalore |
| 29. | MEMS Based Tunable Film Based Bulk Acoustic Resonators with Magnetostrictive/ Piezoelectric Bilayer Composite Thin Films | Prof Jitendra Singh | CSIR- Central Electronics Engineering Research Institute (CEERI), Pilani |
| 30. | Microwave Shielding of Quaternary Composite for Aerospace Industry | Dr Paramjit Kour & Prof Manoranjan Kar | BIT, Mesra, Ranchi & IIT, Patna |
| 31. | Repair of High Value Al-alloys Using Cold Spray Technology | Dr Ayan Bhowmik | IIT, Delhi |
| 32. | Fabrication of High Temperature Piezo Pressure Sensor for Aeronautical Application | Dr Rajat Banerjee & Prof Shiv Govind Singh | CSIR-Central Glass & Ceramic Research Institute, Jadavpur University, Kolkata & IIT, Hyderabad |
| 33. | An Extensive Investigation of Microstructure Evolution during Heat Treatments and Hot Forging of High Strength β-Ti-5553 Alloy | Prof Shanta Chakrabarty | KIIT Deemed to be University, Bhubaneswar, Odisha |
| 34. | Design and Investigation of Nanostructured TBC Coatings (CoCrA1Y/Ta/Hf as a Bond Coatings and 8% y2O3-ZrO2, Top Ceremic Coatings) on Superni-718 Substrate in Adverse Environment at 800-1000C for Aero Space Engines | Prof Atikur Rahman | NIT, Srinagar |
| 35. | Process Development for Refining Commercial Magnesium Metal Through Vacuum Distaillation in Semi-Continuous Mode at 5-6kg Scale | Dr Krishna Kumar | CSIR-National Metallurgical Laboratory, Jamshedpur |
| 36. | Development of Incremental Forming Process Incorporating Novel Strategies for Titanium Alloy Based Aerospace Applications | Prof Anupam Agarwal | IIT, Ropar |
| 37. | Optimization of Post-Investment Cast HIPping Treatment of Aerospace Grade Ti-6AI-4V Alloy for Improvement of Fatigue Life | Prof Kumud Kant Mehta | NIT, Rourkela |
| 38. | Development of Aerospace Components Through Electromagnetic Welding | Dr Meraj Ahmed | CSIR-Advance Materials and Processes Research Institute (AMPRI), Bhopal |
| 39. | Alleviation of Black Skin Formation on Anodizing of Additive Manufactured AISi10Mg Alloy Parts and Enhancement of Corrosion Performance | Prof P Chandramohan | Sri Ramakrishna Engineering College, Vattamalaipalayam, Coimbatore |
| 40. | Evaluation of Mechanical Properties such as Tensile, Creep, LCF, KIC, FCG, CCG Values if an Important Cast Ni Based Superalloy (BZL-12Y) | Prof Sujoy Kumar Kar & Dr S Sivaprasad | IIT, Kharagpur & CSIR- NML Jamshedpur |
| 41. | Optimization of Friction Stir Welding (FSW) Process Parameters for Dissimilar Aluminum Alloy (2024-T3/7075-T6) Lap Joints | Dr M Suresh Kumar | CSIR-NAL, Bangalore |
High Temperature Materials Initiative with Focus on Gas Turbine Materials (GTMAP) under
Material & Manufactureing Panel
| S.NO. | TITLE | PI/Co-PI | INSTITUTE |
|---|---|---|---|
| 1 | Understanding Room Temperature Dwell Fatigue Debit in Titanium Alloys with 3D Microtexture Characterization (GTMAP) | Prof. Satyam Suwas | IISc, Bangalore |
| 2. | Linear Friction Welding of Components for Gas Turbine (GTMAP) | Prof Satish V Kailas | IISc, Bangalore |
| 3. | Design and Development of Bypass Duct Casing Assembly for Aero Engine Applications using High Temperature Composites (GTMAP) | Dr Ramesh Sundaram | CSIR-NAL, Bangalore |
| 4. | Investigations into Ternary Interdiffusion in Bond Coat Systems of Я(Ni, Pt) Al and (Ni, Ru) Al (GTMAP) | Prof Kaustubh N Kulkarni | IIT, Kanpur |
| 5. | Laser Shock Peening of Inconel-718 Aero Engine Alloys (GTMAP) | Prof P Prem Kiran | School of Physics, University of Hyderabad, Gachibowli, Hyderabad |
| 6. | Accelerated Property Prediction of Titanium and Nickel Based Superalloys and Structural Safety Using Machine Learning (GTMAP) | Prof Abhishek Kumar Singh | IISc, Bangalore |
| 7 | Plasma Spraying of Rare-Earth Niobates Powder and Controlling its Stoichiometry and Porosity for the Advanced Thermal Barrier Coating Applications (GTMAP) | Dr Anup Kumar Keshri | IIT, Patna |
| 8 | Through-Process Modeling of DS/SC Superalloy Turbine Blades Processed Using Modified Bridgman Route-Validation with CMSX-4 Alloy (GTMAP) | Prof Abhik Narayan Choudhury & Prof Saswata Bhattacharya & Prof Gandham Phanikumar | IISc, Bangalore & IIT, Hyderabad & IIT, Madras |
Propulsion Panel
| S.NO. | TITLE | PI/Co-PI | INSTITUTE |
|---|---|---|---|
| 1 | Development of a Can-type GT Combustor Operating in Flameless Combustion Mode | Prof Sudarshan Kumar | IIT, Bombay & IIT, Kharagpur |
| 2 | Development of Catalyst System for Stable Combustion of HAN Green Propellants | Dr Shelly Biswas | BIT, Mesra, Ranchi |
| 3 | Sensitizing Fuel Oxidizer-Diluents Mixtures for Detonation Cycle Engines | Dr Ajay V Singh | IIT, Kanpur |
| 4 | Investigation of T--Vaporizer Atomization Performance- Effect of Internal Geometry | Dr Surya Prakash R | IIT, Dharwad |
| 5 | Experimental Studies on Wankel Engine Performance at Enhanced Compression Ratios | Prof AJ Steve Mithran | CSIR-NAL, Bangalore |
| 6 | Measurement of Species Concentration and Temperature Using Coherent Anti-Stokes Ramam Spectroscopy (CARS) in Combustors | Prof Sathesh Mariappan | IIT, Kanpur |
| 7 | Development and Implementation of Non-Gray Radiative Model for Combustion Applications | Dr Pradeep Kumar | IIT, Mandi |
| 8 | Blowoff Dynamics of Afterburner Flame | Dr Anubhav Sinha | IIT (BHU), Varanasi |
| 9 | Development of a Fast Response TDLAS Temperature Sensor for High Temperature Applications | Prof Rajesh Sadanandan | Indian Institute of Space Science and Technology (IIST), Thiruvananthapuram |
| 10 | Numerical Studies on Start/Unstart Behavior of Scramjet Intake | Dr P Senthilkumar | VIT, Vellore |
| 11 | Design Optimization of Turbine Nozzle Guide Vane Three-Dimensional Airfoils | Dr Ravi K Bompelly | Mahindra University, Hyderabad |
| 12 | Experimental Determination of Afterburner Liner Impedance | Dr Aditya Saurabh | IIT, Kanpur |
| 13 | Mixing and Combustion Enhancement in Cavity Based Scramjet Combustor | Prof Vinod Narayanan | IIT, Gandhinagar |
| 14 | Powertrain for All-Electric HANSA NG- Technology Demonstration | Dr R Sudharshan Kaarthik | Indian Institute of Space Science and Technology (IIST), Thiruvananthapuram |
Structures Panel
| S.NO. | TITLE | PI/Co-PI | INSTITUTE |
|---|---|---|---|
| 1 | Unidirectional Tape Pre-preg Based Carbon/ Epoxy Short Fiber Composites: Development, Mechanical Characterization, Stiffness and Strength Predictions | Dr PM Mohite | IIT, Kanpur |
| 2 | Numerical Investigations of Nonlinear Aeroelastic Response of a Deployable Supersonic Missile Fin | Prof Abhilash J Chandy | IIT, Bombay |
| 3 | Aero-Thermo-Elastic Analysis of Hypersonic Vehicle | Prof Mohammed Rabius Sunny | IIT, Kharagpur |
| 4 | Bayesian Model Updating Approach for Systematic Damage Detection | Dr Sahil Bansal | IIT, Delhi |
| 5 | Crack Growth Studies in Multi-Angular Composite Specimens under Fatigue Loading | Mr Viswarupachari CH | CSIR-NAL Bangalore & IIT, Madras |
| 6 | Multiscale Modeling of Failure of Composites | Prof Harpreet Singh | IIT, Goa & IIT, Delhi |
| 7 | Development of a Localized Gradient Damage Based Extended-FE Model for Fatigue Analysis of Aircraft Components | Dr Sachin Kumar | IIT, Ropar |
| 8 | Lightweigth Multi-functionally Graded Meta-Structure of Lattice Infilled Annular Tubes for Enhanced Energy Absorption | Dr Vinod Kushvaha & Dr Tanmoy Mukhopadhyay | IIT, Jammu & IIT, Kanpur |
| 9 | Shimmy Vibration Analysis of UAV with Landing Gears | Dr S Sivakumar | SRM Institute of Science and Technology, SRM Nagar, Kattankulathur Kancheepuram District |
| 10 | Design of Shock Mounts for Typical LRU of Aircraft Using Conventional Shock Mounts and Magneto Rheological Shock Mounts | Dr Hemantha Kumar | NITK Surathkal, Mangalore |
| 11 | Nonlocal Approach for Modelling Delamination in Composites | Dr Amirtham Rajagopal | IIT, Hyderabad |
| 12 | Fully Acoustics Testing of Low Velocity Impact Damage in Composite Plate Using the Concept of Local Defect Resonance | Dr Tanmoy Bose | NIT, Rourkela |
| 13 | Digital Twin Development Employing Bayesian Filters With Sub-Structured Predictor Models for Aerospace Application | Dr Subhamoy Sen | IIT, Mandi |
| 14 | Dynamics and stability of hose-drogue system used in aerial refuelling | Prof Ishan Sharma | IIT, Kanpur |
| 15 | Thermo-Mechanical Fatigue Analyses of Carbon Fibre Reinforced Polymer Composites for Aerospace Applications: Experimental and Modelling Approach | Dr Himanshu Pathak | IIT, Mandi |
| 16 | An Experimental and Numerical Study of Environmental Degradation in Adhesive Joints | Prof Akhilendra Singh | IIT, Patna |
| 17 | A Rapid Method to Manufacture Carbon Nanotubes on Recycled Carbon Fibres to Enhance Mechanical Performance Composite Thereof | Dr Sunny Zafar | IIT, Mandi |
| 18 | Rate-Dependent Constitutive Modeling of Shape Memory Alloy(SMA) Composite for Ballistic Response | Dr Krishnendu Haldar | IIT, Bombay |
| 19 | Experimental and Numerical Investigations on the Failures of Metallic and Composite Structures to Hail Ice Impact | Prof K Ramajeyathilagam | SINCRASH Centre, Hindustan Institute of Technology and Science, Rajiv Gandhi Salai (OMR), Padur, Chennai |
| 20 | Damage Monitoring of Composite Structures Using Multimode In-situ Piezoelectric Sensor Network | Dr Soma Dutta | CSIR-NAL, Bangalore |
| 21 | Effect of Sequence of Loading on the Fatigue Life of GFRP Composites | Prof Indra Vir Singh | IIT, Roorkee |
| 22 | Modeling and Analysis of Cracked Porous FG and FG Sandwich Aircraft Panels using XIGA | Dr Gagandeep Bhardwaj | Thapar Institute of Engineering and Technology, Patiala |
| 23 | Simultaneous Tuning of I, II, and III Mode Frequency of FEA Model With Experimentally Measured Frequencies | Prof SH Upadhyay | IIT, Roorkee |
| 24 | Design of Multi-Stable Variable Stiffness Composite Shells for Morphing Applications | Dr Tanish Dey | Indian Institute of Technology (ISM), Dhanbad |
| 25 | Low Impact Damage Detection in Composite Plate using Modal Data and Shearlet Analysis | Dr R Prakash | NIT, Tiruchirappalli |
Systems/Systems Engineering Panel
| S.NO. | TITLE | PI/Co-PI | INSTITUTE |
|---|---|---|---|
| 1 | Studies and Investigations on Improvement of Effective Communication in Aircraft Mobile Adhoc Networks (AMANET) using Neighbour Based Collaboration Technique for Military Aircrafts | Dr T Menakadevi | Adhiyamaan College of Engineering, Hosur, Tamilnadu |
| 2 | Implementation of Embedded Optic Flow Sensor for Unmanned Autonomous Vehicle Applications | Dr Alluri Sreenivas | GITAM University, Visakhapatnam |
| 3 | Automated Landing of Rotorcraft on Moving Platform | Prof Ranjith Mohan | IIT, Madras |
| 4 | Rolling Element Bearing Health Assessment Algorithm Development using Online Oil Debris Monitoring System Data | Dr Sadanand S Kulkarni | CSIR-NAL, Bangalore |
| 5 | Design of All-Weather Foreign Object Detection System on Runways (Visual and MM Wave Imaging) | Dr Sarika Jain | Amity Institute of Information Technology, Amity University, U.P. |
| 6 | Safe Vision Aided Landing Flight Control System | Prof Arnab Maity | IIT, Bombay |
| 7 | Design of a Streamlined Ablatable Radome for Airborne Applications | Dr Hrishikesh S Sonalikar | BITS, Pilani, Goa Campus |
| 8 | Decision Fusion Technique for a Multisensorial Context for Ensuring Applications in Fault Diagnostics and Decision Support Systems | Prof RK Amit | IIT, Madras |
| 9 | Multi-Vehicular Cooperative Pursuit and Evasion Guidance Strategies: Multi Agent Perspective | Dr Shashi Ranjan Kumar | IIT, Bombay |
| 10 | Single Sided Matrix Converter Fed Brushless DC Motor for Energy Conservation | Dr R Anand | Amrita School of Engineering, Amrita Vishwa Vidyapeetham, Bengaluru |
| 11 | Design, Development and Rotor Dynamic Analysis of Optimized Stack-Structured Permanent Magnet Bearings (OSPMB) | Dr Siddappa I Bekinal | Manipal Institute of Technology, Manipal, Dist. Udupi |
| 12 | Visual Inertial Odometry for Navigation of Unmanned Vehicle in GPS Denied Environment | Dr Shashi Poddar | CSIR- CSIO (Central Scientific Instruments Organisation), Chandigarh |
| 13 | Low RCS Electronic Warfare Antenna for Stealth Platform | Dr Hema Singh | CSIR-NAL, Bangalore |
| 14 | Information Display Design and Human Systems Integration for Advance Fighter Aircrafts | Dr Vivek Kant | IIT, Kanpur |
| 15 | The Research for Energy Saving Systems- Development of All Electric/More Electric Environmental Control System for Fighter Aircraft | Prof Chennu Ranganayakulu | BITS, Pilani, Rajasthan |
| 16 | Design and Implementation of Image-Based Target Identification Using Open Core SoC on FPGA | Prof Prashant V Joshi | REVA University, Yelahanka, Bengaluru |
| 17 | Design Development of Cost Effective and Ultra-Safe Superior Aqueous-Zn ion Battery for Military Aviation | Dr Pravin S Walke | University of Mumbai |
| 18 | Bifurcation Analysis and Reconfigurable Control Design for Autonomous Maneuvering with an Asymmetric Aircraft | Dr Bijoy Krishna Mukherjee | BITS, Pilani |
| 19 | Design and Development of Electromagnetic Coil System to Launch Net Hiding Decoy for Drone Catching | Dr Sandhya Thotakura | GITAM (Gandhi Institute of Technology and Management), Visakhapatnam |
| 20 | Design and Analysis of Multi-Sensor Image Fusion Based Object Detection and Classifications Methods | Dr Jeevan KM | GITAM School of Technology Bengaluru |
Unmanned Aero System Panel
| S.NO. | TITLE | PI/Co-PI | INSTITUTE |
|---|---|---|---|
| 1 | Design and Performance Analysis of Robust Algorithm for Surveillance and Object Reconnaissance Using Enhanced Aerial Imagery | Dr Archana Nandibewoor | SDM College of Engineering & Technology, Dhawalgiri, Dharwad |
| 2 | Power Management System for Energy-Efficient Hybrid Power Source for UAV | Prof Sugesh MS | Sreepathy Institute of Management and Technology, Koottanad, Plalakkad Dt. Kerala |
| 3 | An Experimental Exploration of Efficient Kinematics for Next Generation Flapping Wing Unmanned Aerial Vehicles (FWUAVs) | Prof Amit Gupta | IIT, Delhi |
| 4 | Leader Follower Autonomous Flight Control for UAV Swarm | Prof S Selvi | Dr Sivanthi Aditanar College of Engineering, Tamilnadu |
| 5 | Shape Memory Alloy Actuated Lightweight Auxetic Hinge Coupons for Chordwise Wing Folding of UAVs and Other Deployment Purposes | Dr Sahil Kalra | IIT, Jammu |
| 6 | Active Flutter Suppression of Composite Wing Embedded with Shape Memory Alloys (SMAs) | Prof Rammohan Bhanumurthy | Dayananda Sagar University, Bengaluru |
| 7 | Trajectory Planning and Tracking Control for Automatic Landing of Unmanned Combat Aerial Vehicle | Prof C Ramprasadh | Sastra Deemed to be University, Tirumalaisamudram |
| 8 | Development of Functionally-Graded Hybrid Fiber-Reinforced Polymer Composites for High Strain Rate and Elevated Temperature Aeronautical Applications | Prof Vasant Matsagar & Prof Shamsher Bahadur Singh | IIT, Delhi & BITS, Pilani |
| 9 | Development of an Reinforcement Learning Based Tracking Algorithm for a Mobile Tracker to Strategically Track Intelligently Guided Mobile Target | Dr Chandrajit Choudhury | NIT, Silchar |
| 10 | Development of Self-Healing FRP Composites Using Novel 3D Printing Technology and Their Performance Analysis for Unmanned Aerial Vehicles | Dr PS Shivakumar Gouda | SDM College of Engineering & Technology, Dhawalgiri, Dharwad |
| 11 | A Comprehensive Numerical Electromagnetics Solver Development for Strategic Applications in the Context of Unmanned Aircraft Vehicles | Prof Venkat Prasad Padhy | VIT Bhopal University, Bhopal, MP. |
| 12 | Performance Improvement of Micro Propulsion System for Unmanned Aerial Vehicle (UAV) | Dr Krishnakumar P | Kumaraguru Centre for Industrial Research & Innovation, Kumaraguru College of Technology, Coimbatore |